Translate this site: ¡Â毲df;•œÂ¡Â毲dm;µ­Â¡Â殯t;¡Â㦡cute; | 中国

 
Westlake Plastics Logo Life In Polymers

U.S.A. Headquarters
Phone: 1.800.999.1700  |  1.610.459.1000
Fax : 1.610.459.2579

U.S.A. West Coast Office
Phone : 1.800.440.0597
Fax : 1.714.632.7945

European Headquarters
Phone : + 33 (0)3 20 68 30 35
Fax : +33 (0)3 20 68 07 05

 
Home   :   About Us   :   Products   :   Capabilities   :   Conference Center   :   Contact Us  
 

PRODUCTS

Compression Molded
Absylux®
Dielux®
Kynar® 740
Norylux
Pomalux®
Propylux®
Styraclear
Zelux® M
Zelux® W
High Performance Films
Chemical Resistance
Static Control
High Performance
Medical
Engineering

  Compression Molded Products Image

modified polyphenylene oxide

Download Datasheet (pdf 43kb) | Download MSDS (pdf 688kb)

Norylux modified PPO is a strong engineering plastic with outstanding mechanical, thermal, and electrical properties. Low moisture absorption and low thermal expansion make Norylux one of the most dimensionally stable thermoplastics available. Norylux is widely used for electrical housings and structural components since it has excellent insulating properties, flame resistance, and dimensional stability over a wide range of service temperatures. Norylux is often selected for fluid handling applications since it has low moisture absorption and excellent strength and stiffness. Norylux is easy to fabricate, paint, and glue.

The following physical property information is based on typical values of the base modified polyphenylene oxide resin.

Norylux

Applications Include:
Manifolds
"Pump, valve, and fitting applications"
Scientific and analytical instrument components
Housings
Covers
Electrical components

Advantages of Norylux
Excellent dimensional stability
Low moisture absorption
Good strength and stiffness over a wide range of service temperatures
Good impact resistance
High dielectric strength
Easy to fabricate, paint, and glue
Excellent flammability rating (UL94 V-1 @ .058 thick)

Manufacturing Capabilities:
Rod: 1/8" to 8" diameter
Sheet: .030" to 6" thick
Film: .005" to .029" thick

Color/Grades:
Black (standard)
Glass-filled (gray)
(custom colors available)
FDA compliant grades available on a custom basis

*In addition to our standard capabilities, Westlake also has the ability to process custom resins in various sizes and colors with some exceptions.

Noryluxtm is a Trademark of Westlake Plastics Co.

 
Electrical PropertiesTest MethodEN-26530% GF
 MetricEnglishMetricEnglish
Dielectric Constant at 60Hz
ASTM D150
2.69
2.69
2.15
2.15
Dielectric Strength
ASTM D149
19.7 V/μm
500 V/mil
24 V/μm
600 V/mil
Dissapation Factor at 60 Hz
ASTM D150
7.0 x 10-4
7.0 x 10-4
1.6 x 10-3
1.6 x 10-3
 
Mechanical PropertiesTest MethodEN-26530% GF
 MetricEnglishMetricEnglish
Flexural Modulus
ASTM D790
2551 MPa
370 kpsi
5723 MPa
830 kpsi
Flexural Stregnth at yield
ASTM D790
99 MPa
14.4 kpsi
152 MPa
22 kpsi
Hardness-Rockwell
ASTM D785
R119
R119
L106
L106
Izod Impact Strength
Notched at -40 °F
ASTM D256
1.3 J/cm
2.5 ft-lb/in
0.96 J/cm
1.8 ft-lb/in
Izod Impact Strength
Notched at 73 °F
ASTM D256
1.9 J/cm
3.5 ft-lb/in
1.07 J/cm
2 ft-lb/in
Tensile Elongation at break
ASTM D638
25 %
25 %
5 %
5 %
Tensile Strength at yield
ASTM D638
63 MPa
9.2 kpsi
107 MPa
15.5 kpsi
 
Other PropertiesTest MethodEN-26530% GF
 MetricEnglishMetricEnglish
Specific Gravity
ASTM D792
1.08
1.08
1.23
1.23
Water Absorption at 24 hrs
ASTM D570
0.07 %
0.07 %
0.06 %
0.06 %
 
Thermal PropertiesTest MethodEN-26530% GF
 MetricEnglishMetricEnglish
Coefficient of Thermal Expansion
ASTM D696
5.9 x 10-5 m/m/°C
3.3 x 10-5 in/in/°F
2.5 x 10-5 m/m/°C
1.4 x 10-5 in/in/°F
Flam. Rating-UL94 at 0.058
-
V-1
V-1
V-1
V-1
Flam. Rating-UL94 at 0.236
-
V-0
V-0
V-0
V-0
Heat Deflection Temp. at 66 psi
ASTM D648
°C
°F
138 °C
280 °F
Heat Deflection Temp. at 264 psi
ASTM D648
123 °C
254 °F
132 °C
270 °F
 
 
image    
 
Home   |   About Us   |   Products   |   Capabilities   |   Conference Center   |   Contact Us
© 2017 Westlake Plastics Company. All rights reserved.