Translate this site: ¡Â毲df;•œÂ¡Â毲dm;µ­Â¡Â殯t;¡Â㦡cute; | 中国

 
Westlake Plastics Logo Life In Polymers

U.S.A. Headquarters
Phone: 1.800.999.1700  |  1.610.459.1000
Fax : 1.610.459.2579

U.S.A. West Coast Office
Phone : 1.800.440.0597
Fax : 1.714.632.7945

European Headquarters
Phone : + 33 (0)3 20 68 30 35
Fax : +33 (0)3 20 68 07 05

 
Home   :   About Us   :   Products   :   Capabilities   :   Conference Center   :   Contact Us  
 

PRODUCTS

Compression Molded
Absylux®
Dielux®
Kynar® 740
Norylux
Pomalux®
Propylux®
Styraclear
Zelux® M
Zelux® W
High Performance Films
Chemical Resistance
Static Control
High Performance
Medical
Engineering

  Compression Molded Products Image

polypropylene


Propylux is made from polypropylene resin. Among its most notable characteristics are its mechanical toughness, chemical resistance, and resistance to abrasion. These properties make it suitable for various applications. Propylux Natural, and Void Free are FDA compliant.

The following physical property information is based on typical values of the base polypropylene resins.

Propylux®

Applications Include:
Tanks/tank covers
Welding cabinetry
Etching rinse tubs
Glove boxes
Cutting board
Fan shrouds and blades

Advantages of Propylux®
Excellent chemical resistance
Superior dimensional stability
Low moisture absorption
Low density
Formable and weldable
FDA, USDA

Manufacturing Capabilities:
Sheet (Comp. Molded): 1/4" to 6" thick
Sheet Sizes: 24"x48", 30"x60", 49"x97", 49"x121", 61"x121", 72"x144"
Rod: 3/8" to 4" diameter
Sheet (Fabric Backed): .090" to 3/16" thick
Film: .005" to .029" thick

Color/Grades:
Natural Translucent White, White, Black
(custom colors available)

*In addition to our standard capabilities, Westlake also has the ability to process custom resins in various sizes and colors with some exceptions.

Propylux® is a resistered trademark of Westlake Plastics Co.

 
Electrical PropertiesTest MethodPropyluxPropylux Void-Free
 MetricEnglishMetricEnglish
Dielectric Constant at 1kHz
ASTM D150
2.3
2.3
Dielectric Strength
ASTM D149
24 V/μm
600 V/mil
V/μm
V/mil
 
Mechanical PropertiesTest MethodPropyluxPropylux Void-Free
 MetricEnglishMetricEnglish
Compressive Strength
ASTM D695
6000
6000
Flexural Modulus
ASTM D790
1276 MPa
185 kpsi
896 MPa
130 kpsi
Flexural Strength
ASTM D790
48 MPa
7 kpsi
MPa
kpsi
Hardness-Rockwell
ASTM D785
R95
R95
Heat Deflection Temp. at 66 psi
ASTM D648
99 °C
210 °F
91 °C
195 °F
Heat Deflection Temp. at 264 psi
ASTM D648
54 °C
130 °F
36 °C
96 °F
Izod Impact Strength-Notched
ASTM D256
0.37 J/cm
0.7 ft-lb/in
0.64 J/cm
1.2 ft-lb/in
Tensile Elongation at break
ASTM D638
600 %
600 %
%
%
Tensile Modulus
ASTM D638
1655 MPa
240 kpsi
1172 MPa
170 kpsi
Tensile Strength at yield
ASTM D638
36 MPa
5.2 kpsi
29 MPa
4.2 kpsi
 
Other PropertiesTest MethodPropyluxPropylux Void-Free
 MetricEnglishMetricEnglish
Specific Gravity
ASTM D792
0.91
0.91
0.9
0.9
Water Absorption at 24 hours
ASTM D570
< 0.10 %
< 0.10 %
< 0.10 %
< 0.10 %
 
Thermal PropertiesTest MethodPropyluxPropylux Void-Free
 MetricEnglishMetricEnglish
Coefficient of Thermal Expansion
ASTM D696
1.0 x 10-4 m/m/°C
8.1 x 10-5 in/in/°F
m/m/°C
in/in/°F
Flammability Rating-UL94
-
HB
HB
HB
HB
Continuous Use Temp.
-
82 °C
180 °F
82 °C
180 °F
Melt Temp.
ASTM D4591
166 °C
330 °F
147 °C
297 °F
Thermal Conductivity
-
0.007 - 0.014 watt-meter/K
0.048 to 0.098 BTU-in/hr-ft2-°F
watt-meter/K
BTU-in/hr-ft2-°F
 
 
image    
 
Home   |   About Us   |   Products   |   Capabilities   |   Conference Center   |   Contact Us
© 2017 Westlake Plastics Company. All rights reserved.