Translate this site: ¡Â毲df;•œÂ¡Â毲dm;µ­Â¡Â殯t;¡Â㦡cute; | 中国

 
Westlake Plastics Logo Life In Polymers

U.S.A. Headquarters
Phone: 1.800.999.1700  |  1.610.459.1000
Fax : 1.610.459.2579

U.S.A. West Coast Office
Phone : 1.800.440.0597
Fax : 1.714.632.7945

European Headquarters
Phone : + 33 (0)3 20 68 30 35
Fax : +33 (0)3 20 68 07 05

 
Home   :   About Us   :   Products   :   Capabilities   :   Conference Center   :   Proposition 65   :   Contact Us  
 

PRODUCTS

Compression Molded
High Performance Films
ECTFE Film
PES Film
PVDF Film
Tempalux® Film
Thermalux® Film
TPX® Film
Chemical Resistance
Static Control
High Performance
Medical
Engineering

  Compression Molded Products Image

Made from ULTEM® Polyetherimide Resin

Download Datasheet (pdf 48kb)

Tempalux® offers high heat resistance coupled with high strength, stiffness, UV stability and broad chemical resistance. The combination of outstanding thermal, mechanical and electrical properties together with exceptional flame resistance and thermoformability, provide unprecedented performance for a wide variety of demanding new design concepts.

The following physical property information is based on typical values of the base Ultem® 1000 resin as well as test results obtained from actual film testing.

Tempalux® Film

Applications Include:
Flex circuits
High temperature labels
Electrical insulation
IC sockets
Automotive sensors
Electronic insulation
Hot melt adhesives

Advantages of Tempalux® Film
High heat deflection and continuous use temperature
Inherent flame resistance
Extremely low NBS smoke evolution and superior LOI
Exceptional tensile and flexural strength
High dielectric strength
Low dissipation factor
Exceptional mechanical properties
Dimensionally stable at varying temperatures
Inherent UV stability
Resin FDA compliant

Manufacturing Capabilities:
Thicknesses and Widths:
.001" to .010" up to 27" wide
.011" to .029" up to 26" wide
Finishes:
all thicknesses available polishedrnone side, matte thernother (P/M)

Tempalux® is a Trademark of Westlake Plastics Co.
Ultem® is a Trademark of GE.
Scotch-Weld® is a Trademark of 3M Co.
BONDiT® is a Registered Trademark of RELTEK LLC.

 
Electrical PropertiesTest MethodResult
 MetricEnglish
Surface Resistivity
ASTM D257
> 1016 Ohms
> 1016 Ohms
Dielectric Strength at 0.003
ASTM D149
120 V/μm
3050 V/mil
Dielectric Constant
ASTM D150
3.15 1 kHz
3.15 1 kHz
Dissipation Factor
ASTM D150
0.0013 10 kHz
0.0013 10 kHz
 
Mechanical PropertiesTest MethodResult
 MetricEnglish
Tensile Strength at yield
ASTM D882
98 MPa
14.2 kpsi
Elongation at break
ASTM D882
52 %
52 %
Tensile Modulus
ASTM D882
3275 MPa
475 kpsi
Flexural Modulus
ASTM D790
331 MPa
48 kpsi
Tear Strength - prop.
ASTM D1004
381 g/mil
 
Other PropertiesTest MethodResult
 MetricEnglish
Specific Gravity
ASTM D792
1.27
1.27
Water Absorption at 24 hours
ASTM D570
0.25 %
0.25 %
Refractive Index
-
1.658
1.658
Haze
ASTM D1003
%
%
Area Factor
-
21888 in2/lb/mil
 
Thermal PropertiesTest MethodResult
 MetricEnglish
Continious Use Temp. - UL
-
170 °C
338 °F
Heat Deflection Temp. at 264 psi
ASTM D648
201 °C
394 °F
Melt Temp - DSC
-
°C
°F
Glass Transition Temp.
ASTM D3418
216 °C
420 °F
UL Rating - UL94
-
VTM-0
VTM-0
L.O.I.
ASTM D2862
27 %
27 %
NBS Smoke
ASTM E662
6 DMax
6 DMax
 
 
image    
 
Home   |   About Us   |   Products   |   Capabilities   |   Conference Center   |   Proposition 65   |   Contact Us
© 2018 Westlake Plastics Company. All rights reserved.