Translate this site: ¡Â毲df;•œÂ¡Â毲dm;µ­Â¡Â殯t;¡Â㦡cute; | 中国

 
Westlake Plastics Logo Life In Polymers

U.S.A. Headquarters
Phone: 1.800.999.1700  |  1.610.459.1000
Fax : 1.610.459.2579

U.S.A. West Coast Office
Phone : 1.800.440.0597
Fax : 1.714.632.7945

European Headquarters
Phone : + 33 (0)3 20 68 30 35
Fax : +33 (0)3 20 68 07 05

 
Home   :   About Us   :   Products   :   Capabilities   :   Conference Center   :   Proposition 65   :   Contact Us  
 

PRODUCTS

Compression Molded
High Performance Films
ECTFE Film
PES Film
PVDF Film
Tempalux® Film
Thermalux® Film
TPX® Film
Chemical Resistance
Static Control
High Performance
Medical
Engineering

  Compression Molded Products Image

Made from UDEL® Polysulfone Resin

Download Datasheet (pdf 46kb)

Thermalux® is a tough, rigid, high-strength, amorphous thermoplastic that maintains its properties over a wide temperature range. It has good electrical properties, clarity and toughness, plus exceptional steam resistance and thermoformability. It is used widely in food service, electronics, medical devices, chemical process equipment and automotive industries.

The following physical property information is based on typical values of the base UDEL® P-1700 resin as well as test results obtained from actual film testing.

Thermalux® Film

Applications Include:
Flex circuits
Hot melt adhesives
Thermoformed food trays
High temperature labels
Medical device windows
Hydraulic piston components

Advantages of Thermalux® Film
Exceptional electrical properties over varying conditions
Excellent mechanical properties
Good chemical resistance
Hydrolytically stable
Transparency
Resin FDA compliant

Manufacturing Capabilities:
Thicknesses and Widths:
.001" to .010" up to 27" wide
.011" to .029" up to 26" wide
Finishes:
all thicknesses available polished onernside, matte the other (P/M)

*In addition to our standard capabilities, Westlake also has the ability to process custom resins in various sizes and colors with some exceptions.

Thermalux® is a Registered Trademark of Westlake Plastics Co.
UDEL® is a Registered Trademark of Amoco Performance Products Inc.
BONDiT® is a Registered Trademark of RELTEK LLC.

 
Electrical PropertiesTest MethodResult
 MetricEnglish
Surface Resistivity
ASTM D257
3.0 x 1016 Ohms
3.0 x 1016 Ohms
Dielectric Strength at 0.004
ASTM D149
95 V/μm
2400 V/mil
Dielectric Constant
ASTM D150
3.14 1 kHz
3.14 1 kHz
Dissipation Factor
ASTM D150
0.0013 10 kHz
0.0013 10 kHz
 
Mechanical PropertiesTest MethodResult
 MetricEnglish
Tensile Strength at yield
ASTM D882
73 MPa
10.6 kpsi
Elongation at break
ASTM D882
110 %
110 %
Tensile Modulus
ASTM D882
2482 MPa
360 kpsi
Flexural Modulus
ASTM D790
2689 MPa
390 kpsi
Tear Strength - prop.
ASTM D1004
16 g/mil
 
Other PropertiesTest MethodResult
 MetricEnglish
Specific Gravity
ASTM D792
1.24
1.24
Water Absorption at 24 hours
ASTM D570
0.3 %
0.3 %
Refractive Index
-
1.633
1.633
Haze
ASTM D1003
0.6 %
0.6 %
Area Factor
-
22360 in2/lb/mil
 
Thermal PropertiesTest MethodResult
 MetricEnglish
Continious Use Temp. - UL
-
150 °C
302 °F
Heat Deflection Temp. at 264 psi
ASTM D648
174 °C
345 °F
Melt Temp - DSC
-
°C
°F
Glass Transition Temp.
ASTM D3418
190 °C
374 °F
UL Rating - UL94
-
HB
HB
L.O.I.
ASTM D2862
30 %
30 %
NBS Smoke
ASTM E662
DMax
DMax
 
 
image    
 
Home   |   About Us   |   Products   |   Capabilities   |   Conference Center   |   Proposition 65   |   Contact Us
© 2018 Westlake Plastics Company. All rights reserved.