Translate this site: ¡Â毲df;•œÂ¡Â毲dm;µ­Â¡Â殯t;¡Â㦡cute; | 中国

 
Westlake Plastics Logo Life In Polymers

U.S.A. Headquarters
Phone: 1.800.999.1700  |  1.610.459.1000
Fax : 1.610.459.2579

U.S.A. West Coast Office
Phone : 1.800.440.0597
Fax : 1.714.632.7945

European Headquarters
Phone : + 33 (0)3 20 68 30 35
Fax : +33 (0)3 20 68 07 05

 
Home   :   About Us   :   Products   :   Capabilities   :   Conference Center   :   Proposition 65   :   Contact Us  
 

PRODUCTS

Compression Molded
High Performance Films
Chemical Resistance
Static Control
High Performance
Medical
Lennite® Implant Grade
Pomalux®
Propylux® HS
Propylux® HS2
Radel® R
Tempalux®
Zelux® GS
Engineering

  Compression Molded Products Image

polyphenylsulfone

Download Datasheet (pdf 44kb)

Stock shapes extruded from Radel® R resins offer a superior combination of high performance properties that include excellent thermal stability, outstanding toughness, and good environmental stress cracking resistance. These properties make Radel® R stock shapes attractive for a variety of demanding applications. The standard color of Radel® R is off white, but a transparent grade is available.

The following physical property information is based on typical values of the base Radel® R polyphenylsulfone resin.

Radel® R

Applications Include:
Dairy connectors
Automotive fuses
Food service trays
Food service trays
Sockets and connectors

Advantages of Radel® R
Outstanding impact resistance
Resistance to hydrolysis
Transparent grade available
Excellent thermal stability
Combustion resistance without additives

Manufacturing Capabilities:
Rod: 1/4" to 8" diameter
Sheet: .035" to 1/4" thick
Slab: 3/8" to 4" thick
Film: .001" to .029" thick

Color/Grades:
Off white or transparent

*In addition to our standard capabilities, Westlake also has the ability to process custom resins in various sizes and colors with some exceptions.

Radel® R is the Registered Trademark of Amoco Performance Products, Inc.

 
Electrical PropertiesTest MethodResult
 MetricEnglish
Dielectric Strength
ASTM D149
14.2 V/μm
360 V/mil
Dielectric Constant at 1kHz
ASTM D150
3.45
3.45
Dissipation Factor at 1 kHz
ASTM D150
0.0009
0.0009
Volume Resistivity
ASTM D257
> 1015 ohm-cm
> 3.93 x 1015 ohm-in
 
Mechanical PropertiesTest MethodResult
 MetricEnglish
Tensile Strength at yield
ASTM D638
70 MPa
10.1 kpsi
Tensile Strength at break
ASTM D638
MPa
kpsi
Tensile Modulus
ASTM D638
2344 MPa
340 kpsi
Tensile Elongation at yield
ASTM D638
7.2 %
7.2 %
Tensile Elongation at break
ASTM D638
60.0 - 120.0 %
60.0 - 120.0 %
Flexural Strength at yield
ASTM D790
91 MPa
13.2 kpsi
Flexural Modulus
ASTM D790
2413 MPa
350 kpsi
Compressive Strength at yield
ASTM D695
99 MPa
14.35 kpsi
Compressive Modulus
ASTM D695
1731 MPa
251 kpsi
Izod Impact Strength Un-notched
ASTM D256
No Break J/cm
No Break ft-lb/in
Izod Impact Strength
Notched at 73 °F
ASTM D256
6.9 J/cm
13 ft-lb/in
Hardness (R M L or D)
ASTM D785
R122
R122
 
Optical PropertiesTest MethodResult
 MetricEnglish
Haze
ASTM D1746
15 %
15 %
Transparency
ASTM D1746
50 %
50 %
 
Other PropertiesTest MethodResult
 MetricEnglish
Specific Gravity
ASTM D792
1.29
1.29
Water Absorption at 24 hours
ASTM D570
0.37 %
0.37 %
 
Thermal PropertiesTest MethodResult
 MetricEnglish
Heat Deflection Temp. at 66 psi
ASTM D648
214 °C
417 °F
Heat Deflection Temp. at 264 psi
ASTM D648
207 °C
405 °F
Coefficient of Thermal Expansion
ASTM D696
5.6 x 10-5 m/m/°C
3.1 x 10-5 in/in/°F
Flammability Rating-UL94 at 0.031
-
V-0
V-0
Thermal Conductivity
ASTM C177
0.35 watt-meter/K
2.42 BTU-in/hr-ft2-°F
Limiting Oxygen Index
ASTM D2863
38 %
38 %
 
 
image    
 
Home   |   About Us   |   Products   |   Capabilities   |   Conference Center   |   Proposition 65   |   Contact Us
© 2018 Westlake Plastics Company. All rights reserved.