Translate this site: ¡Â毲df;•œÂ¡Â毲dm;µ­Â¡Â殯t;¡Â㦡cute; | 中国

 
Westlake Plastics Logo Life In Polymers

U.S.A. Headquarters
Phone: 1.800.999.1700  |  1.610.459.1000
Fax : 1.610.459.2579

U.S.A. West Coast Office
Phone : 1.800.440.0597
Fax : 1.714.632.7945

European Headquarters
Phone : + 33 (0)3 20 68 30 35
Fax : +33 (0)3 20 68 07 05

 
Home   :   About Us   :   Products   :   Capabilities   :   Conference Center   :   Contact Us  
 

PRODUCTS

Compression Molded
High Performance Films
Chemical Resistance
Static Control
Absylux® CN-P
Absylux® SD-A
Pomalux® SD-A
Propylux® CN-F
Propylux® CN-P
Propylux® SD-A
Tempalux® CN-F
ZELUX® CN-P
ZELUX® CN-SS
ZELUX® SD-P
High Performance
Medical
Engineering

  Compression Molded Products Image

Conductive Acrylonitrile-Butadiene-Styrene)


Carbon-powder-filled conductive material with high strength and stiffness, and relatively high impact strength. This material is easily machined and fabricated into close tolerance finished parts.

The following physical property information is based on typical values of the resin.

Absylux® CN-P

Applications Include:
Disk drive assembly fixtures
Semiconductor/electronic components
Electronic component transfer trays
Telecommunications hardware
Automotive equipment

Advantages of Absylux® CN-P
Good strength and stiffness
Cost effective
Easily machined
Good chemical resistance
Durable
Bondable

Manufacturing Capabilities:
Rod: 1/8" to 4" diameter
Sheet: .030" to 4" thick
Film: .010" to .029" thick

Color/Grades:
Black

*In addition to our standard capabilities, Westlake also has the ability to process custom resins in various sizes and colors with some exceptions.

 
Electrical PropertiesTest MethodResult
 MetricEnglish
Surface Resistivty dry
ASTM D257
102 - 106 ohm/sq
102 - 106 ohm/sq
Volume Resistivity dry
ASTM D257
102 - 106 ohm-cm
393 - 3937008 ohm-in
Static Decay 15% RH
Mil-B-81705-B
< 0.1 seconds
< 0.1 seconds
 
Mechanical PropertiesTest MethodResult
 MetricEnglish
Tensile Strength at yeild
ASTM D638
28 MPa
4 kpsi
Tensile Elongation at break
ASTM D638
11 %
11 %
Flexural Strength
ASTM D790
50 MPa
7.2 kpsi
Flexural Modulus
ASTM D790
1931 MPa
280 kpsi
Izod Impact Strength Notched
ASTM D256
0.53 J/cm
1 ft-lb/in
Izod Impact Strength Un-notched
ASTM D256
7.21 J/cm
13.5 ft-lb/in
Hardness-Shore D
ASTM D2240
 
Other PropertiesTest MethodResult
 MetricEnglish
Specific Gravity
ASTM D792
1.03
1.03
Water Absorption at 24 hours
ASTM D570
0.3 %
0.3 %
 
Thermal PropertiesTest MethodResult
 MetricEnglish
Heat Deflection Temp. at 264 psi
ASTM D648
85 °C
185 °F
Heat Deflection Temp. at 66 psi
ASTM D648
°C
°F
Flam. Rating-UL94
-
HB
HB
 
 
image    
 
Home   |   About Us   |   Products   |   Capabilities   |   Conference Center   |   Contact Us
© 2017 Westlake Plastics Company. All rights reserved.