Translate this site: ¡Â毲df;•œÂ¡Â毲dm;µ­Â¡Â殯t;¡Â㦡cute; | 中国

 
Westlake Plastics Logo Life In Polymers

U.S.A. Headquarters
Phone: 1.800.999.1700  |  1.610.459.1000
Fax : 1.610.459.2579

U.S.A. West Coast Office
Phone : 1.800.440.0597
Fax : 1.714.632.7945

European Headquarters
Phone : + 33 (0)3 20 68 30 35
Fax : +33 (0)3 20 68 07 05

 
Home   :   About Us   :   Products   :   Capabilities   :   Conference Center   :   Proposition 65   :   Contact Us  
 

PRODUCTS

Compression Molded
High Performance Films
Chemical Resistance
Static Control
Absylux® CN-P
Absylux® SD-A
Pomalux® SD-A
Propylux® CN-F
Propylux® CN-P
Propylux® SD-A
Tempalux® CN-F
ZELUX® CN-P
ZELUX® CN-SS
ZELUX® SD-P
High Performance
Medical
Engineering

  Compression Molded Products Image

Static-dissipative Polycarbonate

Download Datasheet (pdf 39kb) | Download MSDS (pdf 281kb)

Carbon-powder-filled material with resistivity levels in the 107 - 1011 range with high flexural strength and good thermal stability to 270°F. UL94 V-O rated at .030", this material is thermoformable in .010" - .060" gauges, and has low outgassing properties.

The following physical property information is based on typical values of the resin.

ZELUX® SD-P

Applications Include:
Semiconductor/electronic components
Cassette housings
Telecommunications hardware
Explosives handling equipment

Advantages of ZELUX® SD-P
Consistent resistivity values
Low outgassing
UL 94 V-0 flame rating
High strength
Easily machined
Durable

Manufacturing Capabilities:
Rod: 1/8" to 4" diameter
Sheet: .030" to 4" thick
Film: .010" to .029" thick

Color/Grades:
Black

*In addition to our standard capabilities, Westlake also has the ability to process custom resins in various sizes and colors with some exceptions.

 
Electrical PropertiesTest MethodResult
 MetricEnglish
Surface Resistivity dry
ASTM D257
107 - 1011 ohm/sq
107 - 1011 ohm/sq
Volume Resistivity dry
ASTM D257
107 - 1011 ohm-cm
3.93 x 107 - 3.93 x 1011 ohm-in
Static decay
Mil-B-81705-B
< 0.1 seconds
< 0.1 seconds
 
Mechanical PropertiesTest MethodResult
 MetricEnglish
Tensile Strength at yeild
ASTM D638
66 MPa
9.5 kpsi
Tensile Elongation at break
ASTM D638
5 %
5 %
Flexural Strength
ASTM D790
107 MPa
15.5 kpsi
Flexural Modulus
ASTM D790
3103 MPa
450 kpsi
Izod Impact Strength Notched
ASTM D256
0.8 J/cm
1.5 ft-lb/in
Izod Impact Strength Un-notched
ASTM D256
8 J/cm
15 ft-lb/in
Hardness-Shore D
ASTM D2240
78
78
 
Other PropertiesTest MethodResult
 MetricEnglish
Specific Gravity
ASTM D792
1.33
1.33
Water Absorption at 24 hours
ASTM D570
0.18 %
0.18 %
 
Thermal PropertiesTest MethodResult
 MetricEnglish
Heat Deflection Temp. at 264 psi
ASTM D648
132 °C
270 °F
Flam. Rating-UL94
-
V-0 at 0.020
V-0 at 0.020
Coefficient of Thermal Expansion
ASTM D696
6.3 x 10-5 m/m/°C
3.5 x 10-5 in/in/°F
Thermal conductivity
-
0.231 watt-meter/K
1.6 BTU-in/hr-ft2-°F
 
 
image    
 
Home   |   About Us   |   Products   |   Capabilities   |   Conference Center   |   Proposition 65   |   Contact Us
© 2018 Westlake Plastics Company. All rights reserved.