Tempalux® Family
Tempalux® GF20
Tempalux® GF20 is a 20% glass reinforced Polyetherimide (PEI). This product offers high dielectric strength, excellent strength at elevated temperatures, high modulus, and broad chemical resistance. With 20% glass fiber reinforcement the product offers increased tensile strength, stiffness, and dimensional stability over unfilled Tempalux® PEI.
Attributes
Colors Available
Typical Properties
Download Data Sheet | Property | Test Standard | English Units | Metric Units |
| Mechanical | |||
| Flexural Modulus | D790 | 999 kpsi | 6890 MPa |
| Flexural Strength - Break | D790 | 32.9 kpsi | 227 MPa |
| Izod Impact Resistance - Notched | D256 | 1.19 ft-lb/in | 64 J/m |
| Tensile Elongation @ Break | D638 | 4.00 % | 4.00 % |
| Tensile Modulus | D638 | 999 kpsi | 6,890 MPa |
| Tensile Strength @ Break | D638 | 18.9 kpsi | 131 MPa |
| Thermal | |||
| HDT @ 264 psi | D648 | 410 °F | 210 °C |
| HDT @ 64 psi | D648 | 410 °F | 210 °C |
| Physical | |||
| Moisture Absorption | D570 | 0.19 % | 0.19 % |
| Specific Gravity | D792 | 1.42 | 1.42 |
| Electrical | |||
| Volume Resistivity | D257 | 309^12 ohm-ft | 10^12 ohm-cm |
| *Data above is based on testing of injection molded test specimens | |||
Sheet Sizing
Compression Sheet Sizing
Documentation
No documents found.
Similar Products
Non-standard (Made to Order)
Standard Stock
Tempalux®
polyetherimide
- High heat resistance
- High strength and stiffness
- Good chemical resistance
- Inherently flame retardant
2 Colors
Non-standard (Made to Order)
Standard Stock
Tempalux® WM
polyetherimide
- High heat resistance
- High strength and stiffness
- Good chemical resistance
- Biocompatible
2 Colors
Standard Stock
Tempalux® GF30
polyetherimide
- High heat resistance
- High strength and increased stiffness
- Good chemical resistance
- Inherently flame retardant
1 Colors